IMPORTANT: update February 2023 - this is the FINAL stock that VeloSolo will make of these, once they are gone they are gone!

VeloSolo Threaded 7075-T6 1/8" and 3/32" Track Cogs - see stock notes below

Yes, we make standard threaded cogs too! As with our bolt-on cogs these traditional screw on threaded cogs are custom manufactured in England by the UK's leading motorcycle gear and sprocket engineering company. Machined from solid 7075-T6 heat-treated aluminium alloy with teeth precision hobbed the old fashioned way. Gold anodized and laser engraved with thread cut post-anodizing for a perfect fit. Very lightweight and very round.

Wide 7.5mm base will give a 42mm chainline on most track hubs dependant on specific hub specification - much more on this in the FAQ.

Available in 1/8" and 3/32" widths and 15, 16, 17, 18, 19 teeth. Gold anodized. And we now have a limited number of options available in blue, black & red. Note: 15t design does not have 'cut-out' as per photos. Please see this page for sample weights of VS components. All our track cogs in this section (VeloSolo or Andel, Shimano, Dicta, Token etc) have the standard ISO threading of 1.375" x 24 tpi.

£29.95 + UK shipping at £3.95  EU and WORLD shipping at £14.95

Note: final stock available in: 1/8" 16t in BLUE. 3/32" 15 in BLACK. ALL other options are now SOLD OUT.

IMPORTANT: update February 2023 - this is the FINAL stock that VeloSolo will make of these, once they are gone they are gone!

VeloSolo 7075-T6 1/8" Track Cogs Large Logo - FINAL STOCK - see stock notes below

A different option to run alongside our gold track cogs. Available in anodized blue, red or black with large laser etched logo and no other markings, these look superb even if we say so ourselves! Exact same technical specification as above but in a limited range of sizes - 1/8" width only and in 16t, 17, 18. Machined in the UK from solid 7075-T6 heat-treated aluminium alloy with teeth precision hobbed the old fashioned way. Very lightweight and very round.

Wide 7.5mm base will give a 42mm chainline on most track hubs dependant on specific hub specification - much more on this in the FAQ.

Available in 1/8" and 16, 17, 18 teeth.

£29.95 + UK shipping at £3.95  EU and WORLD shipping at £14.95

Note: final stock available in 16t blue. ALL other options SOLD OUT and no longer available

Shimano Dura Ace Threaded Cro-Mo 16t Track Cog - sold out and discontinued

Superb pro level machined steel cro-mo track cogs from the big 'S'. Part of the Dura Ace professional track groupset.

Available in 3/32" width (usable with 3/32" or 1/8" chains) and 16 teeth. Black finish.

Andel (S*rly) Threaded Cro-Mo Track Cog - this is the FINAL stock that VeloSolo will have of these, once they are gone they are gone!

Look familiar to a well known US singlespeed company's cogs?! These come from the exact same production facility as S*RLY but without the name.

Excellent alternative to Dura Ace. Very high quality steel cro-mo track cogs in larger range (and larger tooth count) than Shimano. Superb finish with laser etching and cut-outs on larger sizes.

Available in 1/8" and 3/32" width and 15, 16, 17, 18, 19, 21, 22 teeth. Please see drop down box below for remaining stock. Options not in box are sold out.

£23.95 + UK shipping at £3.95  EU and WORLD shipping at £14.95

Andel Cro-mo Steel Lockring - sold out and discontinued

Alternative to Dura Ace. High quality cro-mo steel. Wide design with inner lip will secure cogs as small as 12t.

This is a LH thread 1.29" x 24 tpi lockring to secure a track cog on a track hub.

Note: if used with the Miche cog system this lockring needs to be run the 'wrong' way round, ie with the writing on the inside. Note: this lockring is not for use with Miche/Campagnolo hubs

CNC Threaded Cog Spacer Kit - sold out and discontinued

This is our five piece spacer kit normally sold for use with bottom brackets but it is also ideal for perfecting chainline with a threaded fixed wheel hub.

CNC machined as per our singlespeed kits in the UK, the combination of five spacers in two widths can be fitted individually between the cog and hub flange to precisely space a cog or freewheel in 1mm or larger increments. Pack of five includes three of 2.5mm and two of 1.0mm.

Use with any cog/freewheel with standard threaded fitting - Dura Ace, Token, EAI, Phil Wood, Surly etc. IMPORTANT: please ensure your cog/hub has enough thread remaining after fitting spacers so the cog is securely fastened. Please see this page for sample weights of VS components. Please see FAQ for more on spacing and chainline.

IMPORTANT: update February 2023 - this is the FINAL stock that VeloSolo will make of these, once they are gone they are gone!

CNC Aluminium Axle Spacers for 126mm Spacing

VeloSolo 2024 Sale item! See SALE PAGE for latest price and to purchase!

To be used in addition to 110/120mm spacer kit to increase 120mm spaced front MTB hub to 126mm for rear of track/road bike. Pack includes 2 x 3mm. Neater alternative to our M10 stainless steel washers. Also ideal for other spacing applications with any 10mm axle as with the 130mm kit below, ie, fitting a 120mm track hub to a 126mm frame etc.

CNC custom machined in the UK from solid 6082 aluminium alloy; not cut from tube. Superb quality. Precision milled to allow perfect fitting of original Shimano bearing seals giving a 'factory' finished look. Please see FAQ for set-up advice.

£??? VeloSolo 2024 Sale item! See SALE PAGE for latest price and to purchase!

IMPORTANT: update February 2023 - this is the FINAL stock that VeloSolo will make of these, once they are gone they are gone!

CNC Aluminium Axle Spacers for 130mm Spacing

VeloSolo 2024 Sale item! See SALE PAGE for latest price and to purchase!

To be used in addition to 110/120mm spacer kit to increase 120mm spaced front MTB hub to 130mm for rear of track/road bike. Or if you need a pair of machined spacers to convert a normal 120mm track hub to fit a 130mm frame this is the kit to use. Pack includes 2 x 5mm. Also ideal for other spacing applications with any 10mm axle.

CNC custom machined in the UK from solid 6082 aluminium alloy; not cut from tube. Superb quality. Easy to fit to any hub with 10mm axle, simply remove outer bearing locknuts, add a 5mm spacer each side and re-tighten locknuts. Please see FAQ for set-up advice.

£??? VeloSolo 2024 Sale item! See SALE PAGE for latest price and to purchase!

M10 and M9 Track Nuts

VeloSolo 2024 Sale item! See SALE PAGE for latest price and to purchase!

Pack of two high quality M10 track nuts with integrated rotating washers. To fit any solid M10 x 1mm threaded axle as above. Strong and secure.

New size as above but in M9 now available to fit most front axles with an M9 x 1mm thread (most common track hubs including Formula, Zenith, etc).

Made in the UK. Chrome finish.

£??? VeloSolo 2024 Sale item! See SALE PAGE for latest price and to purchase!